Axial SCX10 III Motobilt Waypoint Jeep Gladiator, Tan 1:10

Axial SCX10 III Motobilt Waypoint Jeep JT Gladiator 4X4 RTR Brushed Rock Crawler, Tan 1:10

The Axial SCX10 III Motobilt Waypoint Jeep JT Gladiator is a highly detailed 1:10 scale replica of one of the most extreme off-road vehicles. Featuring licensed Jeep details, a shortened bed, KMC rims, Maxxis tires, and LED lighting, it’s perfectly equipped for real-world off-road terrain.

Axial 1/10 SCX10 III Motobilt Waypoint Jeep JT Gladiator Rock Crawler Introduction

Welcome to the world of uncompromising off-road enthusiasts those late-night tinkerers who tinker in their garages with oil-stained hands and a thirst for adventure in their blood. They build machines designed to conquer any terrain. Axial brings this spirit to life with a faithful replica of the SCX10 III Jeep JT Gladiator.
In collaboration with Motobilt, Axial has developed the officially licensed Jeep JT Gladiator, which impresses with authentic scale details. The rugged polycarbonate body features Jeep’s iconic 7-slot grille, detailed fender flares, door handles, air intakes on the hood, and side mirrors. Official Jeep production colors and other details deliver the realism that true fans expect.
Both versions include Motobilt’s Waypoint trim specifications: front and rear bumpers with Baja Designs LP6 bumper lights and S2 rail lights, as well as a scale-accurate 15 lbs. CO₂ tank and a Hi-Lift jack in the cargo bed. Officially licensed Maxxis Trepador tires on KMC Grenade beadlock rims offer an aggressive tread pattern and excellent grip for trail crawling.
The AR45 solid axles feature an offset differential housing on the front axle. Oil-filled shock absorbers with aluminum housings and single coil-over springs are fully adjustable. The front 3-link and rear 4-link suspension geometry uses 6-mm stainless steel rods and pivot balls for maximum off-road durability. The extendable steel C-channel chassis rails, with a 13.9-inch wheelbase, reduce frame flex and improve suspension performance.
The improved SCX10 III Panhard rod mount features a two-piece design with dual shear protection. The skid plate allows for multiple upper link mounting options to fine-tune suspension geometry and anti-squat behavior.
The Spektrum SLT3 radio and the waterproof Firma 40A brushed ESC ensure precise control. The third channel controls the Dig function, which locks the rear axle to engage front-wheel drive for technical terrain. The S683 servo with a 25T steel output gear withstands even the toughest conditions.
The model is powered by an Axial Slick Rock 35-turn brushless motor and a Spektrum Firma 40A ESC. Bright LEDs provide realistic nighttime driving. Silicone straps replace Velcro fasteners and allow easy access to the battery, with both standard and shorty batteries compatible.
Whether you’re an experienced RC enthusiast or just getting started in the hobby, the SCX10 III Jeep JT Gladiator offers authentic design and proven Axial performance right out of the box.

Axial SCX10 III JT Gladiator Video

Axial 1/10 SCX10 III Motobilt Waypoint Jeep JT Gladiator Rock Crawler Features

• Motobilt Waypoint Build - Specifications and Details
• Shortened bed for improved approach and departure angles
• Rugged polycarbonate body, painted and pre-assembled
• Authentic and iconic Jeep design with 7-slot grille
• Detailed fender flares, door handles, hood vents, and side mirrors
• Official Jeep colors
• Wheel arch extensions for a realistic scale look
• Motobilt front and rear bumpers
• Baja Designs LP6 bumper lights
• Baja Designs S2 lights on the cargo bed rails
• Scale-accurate 15 lbs. CO2 tank on the cargo bed
• Hi-Lift jack mount on the cargo bed
• Officially licensed KMC Grenade Beadlock rims
• Maxxis Trepador tires with a soft rubber compound
• AR45 solid axles
• Oil-filled shock absorbers with aluminum threaded bodies
• 3-link front suspension
• 4-link rear suspension geometry
• 6 mm stainless steel suspension links
• Stainless steel pivot balls at the ends of the steering rods
• Extendable steel C-channel chassis rails
• Extended wheelbase of 13.9 inches  
• SCX10 III transmission with complete ball bearing set
• Transmission with internal metal gears
• Improved two-piece Panhard rod mount with dual shear protection
• Skid plate with multiple link mounting options for adjustable geometry and optimized anti-squat settings
• SLT3 3-channel radio
• Waterproof Spektrum 40A brushless ESC
• Axial Slick Rock 35-turn 540 brush motor
• Spectrum S683 servo with 25T steel output gear
• Factory-installed Dig system with included servo and accessories
• Dig function controllable via the remote control’s third channel
• Silicone battery straps
• Compatible with standard or shorty battery packs


OFFICIALLY LICENSED JEEP JT GLADIATOR BODY
This officially licensed scale Jeep JT Gladiator body is made of durable polycarbonate and comes painted and fully assembled. It features Jeep’s authentic and iconic 7-slot grille design, detailed fender flares, molded door handles, ventilation slots on the hood, and side mirrors. In addition, there are two paint schemes to choose from, based on the official Jeep production colors, which perfectly showcase the fun of scale modeling.


MOTOBILT WAYPOINT SPECIFICATION CHART
Both the T1 and T2 variants are equipped with the trim specifications from Motobilt’s Waypoint build. They feature Motobilt front and rear bumpers equipped with Baja Designs LP6 bumper lights and S2 bed rail lights. Additionally, a scale-accurate 15-lb CO2 tank and a Hi-Lift jack are mounted on the cargo bed. This vehicle is designed to turn heads both on trails and off-road.


SPEKTRUM SLT3 REMOTE CONTROL
The Spektrum SLT3 remote control offers precise control on the trail and allows you to control the SCX10 III’s dig function via the third channel. 


STRONGER STEERING SERVO
The S683 servo’s 25T steel output gear provides the necessary durability so drivers can push their limits without fear of failure.


DIG FUNCTION
Dig is a remote-controlled drivetrain mode that locks the rear drivetrain, allowing the front wheels to drive the vehicle. This enables extremely tight turns while the rear wheels remain stationary.


PRE-INSTALLED POWER SYSTEM
The factory-installed brushed power system consists of an Axial Slick Rock 35-turn 540 brushed motor and a waterproof Spektrum™ 40A brushed ESC. Proven electronics that reliably propel you forward on the trails.


AR45 RIGID AXLES
The front AR45 axle is equipped with an offset housing that adds to the scale realism. An optional overdrive gear (AXI332001) is also available.


ALUMINUM ADJUSTABLE COIL-OVER SHOCKS
Oil-pressurized shock absorbers with aluminum threaded bodies and single coil-over springs provide smooth damping, easy tuning, and quick adjustments right on the trail.


OFFICIALLY LICENSED WHEELS
The officially licensed KMC Grenade rims give the Jeep JT Gladiator 4X4 its unique look, while the genuine beadlock design ensures an authentic off-road feel.


OFFICIALLY LICENSED MAXXIS TIRES
The Maxxis Trepador tires, made from Axial’s soft compound, offer outstanding performance and an impressive look. The rugged tread pattern and pronounced side lugs make the Gladiator perfect for trails and challenging rock crawling.


HIGH-PERFORMANCE LED LIGHTS
Equipped with bright, long-lasting LEDs for improved visibility and a realistic night-crawling experience. The detailed LEDs on the bumper, headlights, taillights, and roof rack ensure an authentic, true-to-scale driving experience. Relax and enjoy the trail—or display the model on a shelf and admire its functional and impressive details.


OPTIMIZED SUSPENSION
The front 3-link and rear 4-link suspension geometry features 6 mm stainless steel links and stainless steel pivot balls at the rod ends, ensuring durable off-road performance. With an extended wheelbase of 13.9", this vehicle is ready to conquer any obstacle.


METAL GEARS (ALL-METAL TRANSMISSION)
The SCX10 III’s transmission features metal gears with ball bearings for off-road power you can count on.


SCX10 III STEEL C-CHANNEL CHASSIS
Since the Jeep JT Gladiator has a longer wheelbase than most other scale models, it’s equipped with extendable, realistic steel C-channel chassis. These reduce frame flex and improve suspension performance. Want a shorter wheelbase or a new design? Get original Axial links and a new body to create your perfect model.


IMPROVED PANHARD BAR MOUNT
Axial’s engineers went back to the drawing board and improved the Panhard bar mount on the SCX10-III platform. With its new two-piece design and dual skid protection, this redesigned component won’t let you down on the trail.


SKID PLATE
The SCX10 III’s skid plate offers multiple mounting options for the upper link, allowing you to fine-tune the suspension geometry and precisely adjust the anti-squat value.


ADJUSTABLE BATTERY MOUNT
The Axial designers have redesigned the SCX10 III’s battery mounting system. Instead of Velcro straps, practical silicone elastomer straps are now used, allowing for quick and easy access to the battery. You can also use both standard and shorty batteries to optimally adjust your vehicle’s weight to the demands of the trail.

Specifications

• LiPo Compatibility: 2S, 3S
• Oil Type & Content: 35
• Differential: Spool
• Vehicle Type: Rock Crawler
• Motor Size: 540
• Suspension: Front 3-link, Rear 4-link
• Charger: Sold separately
• Estimated assembly time: No assembly required
• Battery: Sold separately
• Connector type: IC3
• Lighting: LED
• Make: Jeep
• Vehicle Size: Standard
• Product Height: 9.2" (234 mm)
• Drive Type: Forward/Brake/Reverse
• Max Battery Dimensions: 138 x 46 x 35
• Pinion: 14T
• Motor Type: Brushed Motor
• Brakes: Programmable
• Servos: Included
• Wheel Type: Officially licensed KMC Grenade beadlock wheels
• Drivetrain: 4WD
• Body: Polycarbonate, officially licensed Jeep JT Gladiator
• Shock Type: Oil-filled shocks with aluminum threaded bodies
• Final Drive Ratio: 47.20
• Product Weight: 6.7 lbs. (3.02 kg) without battery
• Assembly Level: Ready-To-Run
• Product Length: 21.7" (551 mm)
• Product Width: 9.9" (251 mm)
• Tire Type: Maxxis Trepador in Axial’s soft compound
• ESC: Included
• Scale: 1/10
• Internal Gear Ratio: 11.80
• Rim Spoke Spacer Size: 12 mm
• Remote Control: Included
• Spur Gear: 56T
• Chassis: Steel C-channel with expandable rails
• Power Type: Electric

Content

• 1x Axial SCX10 III Motobilt Waypoint Jeep JT Gladiator 4X4 RTR with brushed motor rock crawler
• 1x Spektrum SLT3 3-channel radio
• 1x Spektrum SR515 receiver
• 1x Spektrum 40A Waterproof Brushed ESC
• 1x Axial Slick Rock 35-Turn Brushed Motor
• 1x S683 Servo with Steel Gears
• 1x SX108 Dig Micro Servo
• 1x User Manual
• 4x AA batteries

Required for assembly

• 1x rechargeable battery
• 1x Charger