Punktlicht-Chip, 4W orange

Compact high-performance LED module with dot chip for universal applications in model making.
With a reference output of 4 W, the module delivers a very high luminous efficacy with compact dimensions.
Ideally suited as a flash light, position light or strobe - available in various colors: RED, GREEN, WHITE, WARM WHITE, ORANGE and BLUE.
The light is ready for connection to 2S Lipo (8 V). For 3S operation, an additional resistor or a suitable 3S adapter cable is required.

Technical data

• Reference power: 4 W
• Voltage: 8 V (2S) or 12 V (3S with additional resistor)
• Current consumption: approx. 0.35 A
• Beam angle: approx. 140°
• Luminous intensity:
- approx. 50 lm (RED)
- approx. 80 lm (GREEN)
- approx. 110 lm (WHITE)
- approx. 90 lm (WARM WHITE)
• Dimensions: Housing Ø 20 × 7 mm, LED chip Ø 8 × 5 mm
• Weight: approx. 2 g (without cable)
• Cable length: 1 m silicone, 0.25 mm²
• Design: round
• Function: Flash / strobe

Scope of delivery

• 1× dot LED module in selected color (RED, GREEN, WHITE, WARM WHITE, ORANGE or BLUE)
• 1× pre-assembled series resistor for 2S operation
• 1 m connection cable (silicone)

Still required

• For 3S operation: additional resistor or 4W-3S adapter cable
• Optional: heat sink or mounting plate for heat dissipation

Installation instructions

Sufficient air convection or heat sink mounting is required for continuous operation.
The operating temperature should be checked after installation - 70 °C is normal, but above this temperature damage may occur.
Ensure stable installation and correct power supply.

Warnings

• High-power LEDs can become very hot - ensure adequate cooling
• Never look directly into an active LED - risk of injury
• No warranty in the event of overheating due to improper installation