Wingstabi EVOLUTION 7ch M-LINK

The next evolutionary step in flight stabilisation for fixed-wing models from Multiplex - Made in Germany. For the development of the WINGSTABI Evolution, we have been able to create an enormous database of the most diverse flight models over the years. The WINGSTABI Evolution is the logical consequence of this and raises the product to a new level. The control system has been fundamentally optimised in terms of its performance, latency and basic settings. All previous WINGSTABI systems can be updated to the Evolution software free of charge and without restrictions. This means that the WINGSTABI Evolution can now be used straight out of the box with high performance and without problems on almost all model aircraft. A multitude of new innovations and functions have also been incorporated into the WINGSTABI Evolution software, which now leaves nothing to be desired.


Examples of this are:
• A greatly improved basic set-up to get you flying straight away
• Introduction of optional speed-dependent control for optimum performance in any flight condition
• Introduction of a stop function for a natural and smooth action of flight stabilisation
• Possibility of two-receiver operation via SRXL for absolute safety in any flight condition
• Support for 8-flap wings, canards, optimised FAIL-Safe and much more.

Compatible with all common RC systems

.
- Jeti (EX-Bus, UDI)
- Graupner (SUMD)
- FrSky (S.BUS)
- Spektrum (SRXL)
- HiTEC (MAXIMA SL, OPTIMA SL)
- Weatronic (PPM)
- MULTIPLEX (SRXL)
- CORE (S.BUS, SRXL)

Differentiation WINGSTABI Evolution EasyControl and WINGSTABI Evolution Classic EasyControl

• The model is programmed completely on the transmitter as before (deflections, flaps, expo, flight phases...).
• We need a free channel to which we assign a free proportional encoder
• Very easy to set up, even without PC Classic
• The model is almost completely programmed in WINGSTABI (deflections, mixers, flaps...)
• We need a free 3-step switch and at least one free proportional encoder.
• Extensive set-up on the PC or via APP


Every new Wingstabi Evolution is always delivered as "Evolution EasyControl" as standard and can be reconfigured to "Evolution classic" via the MPX Launcher free of charge if required. The WINGSTABI Evolution has an unbeatable price-performance ratio. Try it out and come with us into the 21st century of model flying!

(Speed compensation via pitot tube or GPS Patent: DE 10 2013 201 554 B3 PowerboxSystems)

Freely programmable 3-axis gyro system with integrated MULTIPLEX receiver RX-7/9 DR pro M-LINK for all RC fixed-wing models.

Features

.
- Integrated M-LINK receiver incl. telemetry
- Optimised high-end control behaviour
- Optional speed-dependent control
- Support of receiver diversity
- Plug & Play setup possible without PC
- Programming also possible via PC or Android app
- Up to 4 freely configurable flight/control phases
- 7/9 servo outputs
- Free channel assignment
- Individual settings for each servo (5-point curve, frequency, expo, fail-safe, ...)
- Extensive possibilities for flaps and mixers (delta mixer, V-tail, canards, ...)
- Diversity possible


For our MULTIPLEX users we offer a solution with integrated M-LINK receiver. Packaged in a design housing made of anodised aircraft aluminium, it features the latest RX-DR pro receiver technology.