MICROBEAST ULTRA PRO-EDITION

The MICROBEAST ULTRA is the quintessence of over 10 years of development and realization of stabilization systems for RC helicopters. It combines all the features of the previously released BEASTX systems and is equipped for the future with a modern ARM Cortex MPU with even more computing power and memory capacity.


What can the MICROBEAST ULTRA do?
The MICROBEAST ULTRA is a control unit for RC model helicopters. The integrated gyro elements stabilize the helicopter as far as possible so that it only follows the pilot's control commands. Almost all commercially available remote control systems are supported and the update option means that new systems can be installed at any time. Additional useful functions can be added to the system via chargeable upgrades. For example, a telemetry connection is available in which the MICROBEAST ULTRA acts as an interface between the various sensor systems and remote control standards. With AttitudeControl, we offer additional attitude stabilization and model rescue for flight training and beginner training. The bank changeover allows the system to be adapted to the pilot's requirements to the maximum via various parameter sets that can be called up in flight.
The system can be configured using the comprehensive StudioX app, which is available for almost all platforms (requires additional USB or Bluetooth interface). For those who like it old school, there is no need for a smartphone or interface. As with the first MICROBEAST, most functions can be set up via a button on the device and with the remote control using the LEDs.

Technical data

• High input voltage range from 4 to 9 volts
• Supports almost all remote control systems with conventional servo connections and with sum signal output such as SBUS, XBUS, EXBUS, iBus, UDI, SRXL, SRXL2, FRSky F.Port, SPPM, SUMD and Spektrum/JR/ALIGN satellites
• Pre-built swashplate mixers for mCCPM and 90, 120, 140 eCCPM + completely freely configurable mix for almost all types of helicopters with up to 4 swashplate servos and virtual swashplate rotation for scale helicopters
• Adjustable repetition rate on the swashplate with up to 300Hz
• Integrated tail gyro with torque pre-control (RevoMix) and support for almost all types of tail servos and center pulses of 760, 960 and 1500 (1520)µs and a repetition rate of up to 560Hz
• Integrated speed control function for electric and combustion helicopters (requires speed sensor or motor controller with speed output)


The following additional functions are included in the Pro Edition
• Rescue function for stabilization and support when flying
• Bank switching to change between different settings during flight
• Telemetry support transforms the MICROBEAST ULTRA into a control center for receiving and sending telemetry data from various sources

Scope of delivery

• MICROBEAST ULTRA PRO-EDITION
• Receiver connection cable set
• Adapter cable SRXL2 Microbeast
• Adapter cable Telemetry Micobeast
• 3M adhesive pad
• Adjustment tool
• Decal sheet