T-REX 650X Super Combo (MB)

The T-REX 650X Dominator Super Combo was specially developed for hobby use and 3D competitions. The size of the T-REX 650X is between that of the T-REX 600 and T-REX 700 helicopters. It uses integrated composite materials and technologies that efficiently improve structural intensity and facilitate repair. The upper narrow main frame reinforces the structure and protects the fuselage from deformation, vibration and gear wear during extreme flights. The lower wider main frame is equipped with a quick release for the battery, which makes the assembly and disassembly of the battery more convenient and safer. The flybarless rotor head with low center of gravity is more suitable for 3D flight to reduce wind resistance and improve flight feel and stability. Thus, the ALIGN T-REX 650X shows excellent flight performance in aggressive 3D flight as well as in slow 3D and F3C flight!

The T-REX 650X is equipped with an ALIGN 800MX motor, which has excellent torque and high efficiency. In addition, the reinforcement plate can not only strengthen the structure of the machine, but also reduce the engine heat by up to 20°C on average during each flight. The brushless RCE-BL180A ESC supports 12S 3000~6000mAh battery input. Pilots can choose main blades from 600~650mm according to preference to achieve excellent flight performance.

The T-REX 650X Dominator Super Combo is the helicopter for all pilots, offering both super performance and excellent stable 3D flight like a 700 helicopter and elegant slow dynamic 3D flight performance like a 600 helicopter.

Focus shots

Standard equipment
• 1x RCE-BL180A brushless ESC
• 1x800MX brushless motor (440KV/4530)
• 3x DS830M high-voltage brushless servo
• 1x DS835M high-voltage brushless servo
• 1x Microbeast PLUS flybarless system

Technical specifications

• Length: 1220mm
• Height: 356mm
• Width: 191mm
• Length of main blade: 650mm
• Main rotor diameter: 1455mm
• Tail rotor diameter: 280mm
• Motor pinion: 16T
• Main drive gear: 112T
• Autorotation tail drive gear: 131T
• Tail drive gear: 34T
• Gear ratio: 7:1:3.85
• Take-off weight (without battery): 3320g


Brushless motor 800MX(440KV/4530)
• Input voltage: 12S
• Max. continuous current: 100A/200A(2sec)
• Max. Output power: 4440W/8800W(2sec)
• KV value: 440KV
• Stator dimension: 4530
• Stator arms: 12
• Magnetic poles: 10
• Dimensions: Spindle 6x56.7x94.5mm
• Weight: 508g

Scope of delivery

• 1x T-REX 650X DOMINATOR
• 1x 650 carbon fiber blades
• 1x 105 carbon fiber rear wing
• 1x800MX brushless motor (440KV/4530)
• 3x DS830M high-voltage brushless servo
• 1x DS835M high voltage brushless servo
• 1x RCE-BL180A brushless speed controller
• 1x Microbeast PLUS flybarless system

Required for assembly

• Radio transmitter and electronic equipment
• Transmitter (6-channel or more, helicopter system)
• Receiver (6-channel or more)
• 2x 6S Li-Po 3000~6000mAh battery
• Digital inclinometer