Scorpion 80V 1880uF Capacitor / PDB Board (with mounts)

The Scorpion 80V 1880uF Capacitor / PDB Board was designed for large UAVs and high-voltage applications where long cable runs between the battery and the ESC are unavoidable. Long battery leads can cause interference and voltage spikes that may strain or damage the ESC. The low-impedance capacitor bank is rated for high-voltage ESCs up to 14S LiPo and is suitable for cable lengths ranging from more than 150 mm to 1.5 m between the battery and the ESC. Additionally, the circuit board can be used as a power distribution board, making it easier to connect multiple batteries in parallel or series. This version comes with two mounts, including mounting hardware, that can be mounted directly onto the board, enabling easy attachment to the UAV and providing better vibration isolation.

Features

• Low-impedance capacitor bank for high-voltage controllers.
• Reduces interference and voltage spikes with long battery cables.
• Suitable for high-voltage applications up to 14S LiPo.
• Recommended for cable lengths between the battery and ESC ranging from more than 150 mm up to 1.5 m.
• Can also be used as a power distribution board.
• Makes it easier to connect multiple batteries in parallel or series.
• Includes 2 mounts with mounting hardware.
• Mounting brackets can be attached directly to the circuit board.
• Enables easy installation on the UAV.
• Improved vibration isolation thanks to screws and rubber grommets.
• For cable lengths exceeding 1.5 m, additional capacitor boards are required along the cable.

Specifications

• Voltage: up to 80 V
• Capacitance: 1880 uF
• Suitable for: up to 14S LiPo
• Recommended cable length: over 150 mm up to 1.5 m
• Application: Capacitor bank / power distribution board

Content

• 1x Capacitor / PDB Board
• 2x Mounting Brackets
• Mounting hardware