MICROBEAST PLUS + Bevel Box + Mounting frame
Item has been replaced by a newer version BXM76542-BB-MR MICROBEAST ULTRA + Bevel Box + Montagerahmen
BEASTX - SET
MICROBEAST PLUS + Bevel Box + Mounting frame
MICROBEAST PLUS
current firmware
The Flybarless-Revolution!
MICROBEAST PLUS is based on the popular MICROBEAST and starts the next level of the BEASTX flybarless revolution. MEMS sensors of the latest generation measure the aircraft?s rotational movement with unprecedented precision and transmit the data digitally and in real time to the control system. These new sensors are insensitive to typical vibrations of a model helicopter. The housing made of plastic composite material keeps the weight of MICROBEAST PLUS sensationally low.
MICROBEASTPLUS and MICROBEASTPLUSHD work with the world?s proven EasySetup of BEASTX. The sophisticated setup can quickly be done everywhere and no expensive programming box or computer is needed. So many settings can be changed simply and easily at the flying field. Further options are available with the optional USB2SYS in-ter-face and the StudioX software package. MICROBEAST PLUS can be kept up to date by using the update functionality and advanced pilot can
thus customize the unit specifically to their needs. StudioX for Windows & Mac is available for download at www.beastx.com.
MICROBEAST PLUS
Input voltage: 3,5 V - 8,5 V DC (Operation with 2 cell LiPo possible)
Processor: 32 Bit ARM
Sensor: 6-Axis MEMS (Gyro + Accelerometer)
Dimensions: 36 x 25 x 14 mm
Weight (w/o wiring): ca. 11g
Features:
Servo center pulses:
Swashplate: 1520΅s
Rudder: 1520΅s, 960΅s, 760΅s
Servo pulse rates:
Swashplate: 50 - 200Hz
Rudder: 50 - 560Hz
Swashplate mixing:
mCCPM, eCCPM: 90, 120, 135, 140
Swash phasing (by using StudioX)
Input signals:
Single channels
PPM serial pulse
SRXL (JR XBus, SUMD, M-Link...)
Futaba S.Bus/S.Bus2
Spektrum Remote Receiver* (DSM2/DSMX)
* with Spektrum Remote Receiver adapter
Box contents:
MICROBEAST PLUS
Receiver connection cables
3M adhesive pads
Adjustment tool
Printed instruction manual
Accessories:
USB2SYS Interface
Spektrum Remote Receiver adapter
360° Inclinometer "Bevel Box"
Digital Bevel Box solves the problem - just put on the magnetically adhering device and is immediately displayed the exact horizontal angle.
So you can precisely align your tools, rows are marked out accurately.
* Measuring range =b1180 degrees, Accuracy =b10,1 degrees
* Resolution 0,1 degrees
* Waterproof housing (IP 54)
* Magnetic Case
* Dimensions (W x H x D): 50 x 50 x 32 mm
* Operating with 1x Button Cell CR 2032 (in content)
Mounting frame for Bevel Box (BXA76005)
use for T-Rex 450 to 700
- to adjust pitch just put the mounting frame on your rotorblade.
Technical Data :
Material: carbon, black
Thickness: 2,5mm
Content:
MICROBEAST x1
Receiver connection cables x1
Mounting material
Adjust tool x1
Instruction manual x1
Inclinometer Bevel Box x1
Bag x1
Li-Button cell /CR2032 x2
Mounting frame for Bevel Box x1
BEASTX - SET
MICROBEAST PLUS + Bevel Box + Mounting frame
MICROBEAST PLUS
current firmware
The Flybarless-Revolution!
MICROBEAST PLUS is based on the popular MICROBEAST and starts the next level of the BEASTX flybarless revolution. MEMS sensors of the latest generation measure the aircraft?s rotational movement with unprecedented precision and transmit the data digitally and in real time to the control system. These new sensors are insensitive to typical vibrations of a model helicopter. The housing made of plastic composite material keeps the weight of MICROBEAST PLUS sensationally low.
MICROBEASTPLUS and MICROBEASTPLUSHD work with the world?s proven EasySetup of BEASTX. The sophisticated setup can quickly be done everywhere and no expensive programming box or computer is needed. So many settings can be changed simply and easily at the flying field. Further options are available with the optional USB2SYS in-ter-face and the StudioX software package. MICROBEAST PLUS can be kept up to date by using the update functionality and advanced pilot can
thus customize the unit specifically to their needs. StudioX for Windows & Mac is available for download at www.beastx.com.
MICROBEAST PLUS
Input voltage: 3,5 V - 8,5 V DC (Operation with 2 cell LiPo possible)
Processor: 32 Bit ARM
Sensor: 6-Axis MEMS (Gyro + Accelerometer)
Dimensions: 36 x 25 x 14 mm
Weight (w/o wiring): ca. 11g
Features:
Servo center pulses:
Swashplate: 1520΅s
Rudder: 1520΅s, 960΅s, 760΅s
Servo pulse rates:
Swashplate: 50 - 200Hz
Rudder: 50 - 560Hz
Swashplate mixing:
mCCPM, eCCPM: 90, 120, 135, 140
Swash phasing (by using StudioX)
Input signals:
Single channels
PPM serial pulse
SRXL (JR XBus, SUMD, M-Link...)
Futaba S.Bus/S.Bus2
Spektrum Remote Receiver* (DSM2/DSMX)
* with Spektrum Remote Receiver adapter
Box contents:
MICROBEAST PLUS
Receiver connection cables
3M adhesive pads
Adjustment tool
Printed instruction manual
Accessories:
USB2SYS Interface
Spektrum Remote Receiver adapter
360° Inclinometer "Bevel Box"
Digital Bevel Box solves the problem - just put on the magnetically adhering device and is immediately displayed the exact horizontal angle.
So you can precisely align your tools, rows are marked out accurately.
* Measuring range =b1180 degrees, Accuracy =b10,1 degrees
* Resolution 0,1 degrees
* Waterproof housing (IP 54)
* Magnetic Case
* Dimensions (W x H x D): 50 x 50 x 32 mm
* Operating with 1x Button Cell CR 2032 (in content)
Mounting frame for Bevel Box (BXA76005)
use for T-Rex 450 to 700
- to adjust pitch just put the mounting frame on your rotorblade.
Technical Data :
Material: carbon, black
Thickness: 2,5mm
Content:
MICROBEAST x1
Receiver connection cables x1
Mounting material
Adjust tool x1
Instruction manual x1
Inclinometer Bevel Box x1
Bag x1
Li-Button cell /CR2032 x2
Mounting frame for Bevel Box x1
Exchanged with a newer version
Item number | BXM76400-BB-MR |
Manufacturer | BEASTX |
Packing weight | 0,3 Kg |
EAN | 10007723 |