C1.5CLS PRO L (9mm)

Description
The C 1.5 CLS PRO is an extremely light and small linear servo which is suitable for indoor / micromodels. The C 1.5CLS PRO can be operated directly with a 1s LiPo and with max. 6V. The low weight of only 1.5 grams and the JR servo connector make it the ideal servo for micro applications.

It can be operated with any conventional receiver with PWM signal. When the servo is de-energized, the servo arm is fixed! The maximum servo travel is 9mm. The actuating force at 3.7V is 0.12kg*cm at 6V it is 0.24kg*cm
The travel time to 9mm is 0.153s at 3.7V and 0.108s at 6V. The C1.5 CLS PRO is available in the R = right and L = left version, please check which version suits you best!

• Extremely small and lightweight linear servo (left)
• Suitable for micromodels / indoor models, the servo horn is fixed without voltage
• Dimensions 21.4 x 15.2 x 6mm, 1.5 gram weight
• Voltage range 3.7 -6V (can be operated with 1s LiPo)
• Can be operated on any receiver with a normal PWM signal, conventional JR servo plug

Technical data

• Actuating time S2/60° (sec): 0.1
• Actuating force S1 (kg*cm): 0.12
• Actuating time S1/60° (sec): 0.15
• Actuating force S2 (kg*cm): 0.24
• Weight (g): 1.5
• Width (mm): 15.2
• Length (mm): 21.4
• Voltage 1 (Volt): 3,7
• Voltage range: 3.7-6V
• Height (mm): 6
• Control frequency: Up to 333Hz, center pulse 1520 us
• Packaging: Plastic bag AGF
• High-voltage capable up to 8.4V: No
• Ball bearing (number): 1
• Motor type: Brush motor
• Recommended applications: Helicopter, airplane, car, boat
• Gearbox type: Plastic
• Housing type: Plastic
• Voltage 2 (Volt): 6,0
• Classification: Linear servo