Shopping Cart
Shopping Cart
Shopping Cart is empty
  
ENG | DEU

AXIAL AX24 XC-1, 1/24th 4WS Crawler Brushed RTR, Green

AXI00003T1 - AXIAL AX24 XC-1. 1_24th 4WS Crawler Brushed RTR. Green AXI00003T1
Picture can be different from original item
               
            
Push past boundaries and conquer more trails with the Axial AX24 XC-1 Rock Crawler RTR. Unique 4WS modes, extreme articulation, oversize tires, and more let you crawl over bigger obstacles and pull tougher lines than any other 1/24 scale rig.


Key Features


Three 4-wheel steering (4WS) modes give all drivers new terrain conquering ability.
Side plate chassis allows greater articulation for improved handling over rough terrain.
LED rock lights mounted in the rock sliders keep your path visible in low light.
Rockster wheels and Rock Lizards tires produce trail-taming traction.
Fully equipped — you can hit the trails almost immediately!


Features


Three 4-wheel steering (4WS) modes give drivers new terrain conquering ability.
Side plate chassis allows greater articulation for improved handling over rough terrain.
LED rock lights mounted in the rock sliders keep your path visible in low light.
Long travel coilover shocks keep wheels on the ground to maximize traction.
4-Link front and rear suspension reduces axle steer and torque twist.
Front and rear lockers with worm gear setup increase ground clearance.
Steel front and rear axles, stub axles, and dog bones provide strength.
Splined and sleeved drive shafts increase suspension travel.
Hinged body system offers easy access to on-board components.
Rockster wheels and Rock Lizards tires produce trail-taming traction.
No bushings — entire vehicle features sealed bearings.
Dynamite 88T motor provides the torque to conquer steep climbs.
Fully equipped — you can hit the trails almost immediately!


Overview


Every weekend, groups of off-road rock crawling enthusiasts gather to follow trails toward destinations far removed from the modern world. Their journey's end will reward them with beautiful views that only a select few ever see. But the best memories are made during the journey itself.

Within this community are the extreme crawlers. Where others see rocks, roots, and barriers, they see puzzle pieces that form a line to maneuver up, over, and beyond. It doesn't matter if most people would have trouble getting through on foot, let alone on wheels. Extreme crawlers have such a deep connection to their rig that they know when it can be pushed to new limits.

The 1/24 scale Axial AX24 XC-1 speaks to the extreme crawlers, and to everyone who wants to be one. With the AX24 XC-1, you'll be able to crawl over bigger obstacles and pull tougher lines than you can with any other 1/24 scale rig.

The new AX24 platform provides stability, durability, high clearance, generous articulation, and everything else extreme rock crawling enthusiasts need to overcome the impossible. Flat chassis side plates with rock sliders help you move through tight formations. Long travel shocks, a 4-link suspension, and worm gear drivetrain combine for easy handling, dependable power delivery, and the ability to clear rough terrain.

Then there's the unique AX24 4-wheel steering system. Following tightly to the line that leads from "here" to "there" has never been easier. Three transmitter-activated steering modes — for no rear tire input, mirrored rear tire input, or "crab crawl" — provide the flexibility you need to maneuver over or around almost anything in your way. This system gives all drivers new terrain conquering ability!

In 2007, Axial broke new ground in extreme RC crawling with the 1/10 scale AX10. If you're a long-time Axial fan, you'll love how the AX24 XC-1 pays homage to that legendary rig with a replica body and livery plus Rockster wheels and Rock Lizards tires.

The AX24 XC-1 isn't just for experienced RC rock crawling hobbyists (though you'll enjoy how it takes on even steeper inclines and bigger obstacles than our SCX24 platform rigs). Newcomers will find it to be a fun and highly capable mini crawler to run on indoor or outdoor courses. It's also a great way for full-scale off roading enthusiasts to exercise and refine their skills.

Get ready to push past boundaries and conquer more trails with the Axial AX24 XC-1 Rock Crawler RTR. Because it's fully assembled and equipped, you can start today.



FOUR-WHEEL STEERING (4WS)


The unique AX24 4-wheel steering system gives all drivers new terrain conquering ability. Three transmitter-activated modes — no rear tire input, mirrored rear tire input, and "crab crawl" — provide the flexibility you need to maneuver over or around anything in your way.


SIDE PLATE CHASSIS


The durable side plate chassis is engineered to allow high clearance and generous articulation. Angled rock sliders also help you maneuver past rocks, roots, ledges, and other large obstacles. Driving the AX24 XC-1, you go where you want to go!


LED LIGHTS


LED rock lights mounted in the rock sliders keep your path visible in low light. You'll be able to see and surmount obstacles you might not otherwise spot. Day or night, the AX24 XC-1 keeps your adventure alive.


COILOVER SHOCK ABSORBERS


Longer, 51mm coilover shocks are new for the AX24 platform. Mounted at a lay back angle in the side plate chassis, they allow increased articulation to keep the wheels on the ground and maximizing traction over uneven surfaces.


4-LINK FRONT AND REAR SUSPENSION


The suspension geometry uses a 4-link design that works together with the AX24 side plate chassis to increase articulation and reduce axle steer and torque twist.


WORM GEARS


The front and rear axle housings each have a worm screw and worm gear setup to get power to the axles and create higher ground clearance.


DURABLE STEEL AXLES


Steel front and rear axles, stub axles and dog bones provide the strength and durability needed to keep running with confidence during tough climbs and over rough trails.


SPLINED DRIVE SHAFTS


The drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.


HINGED BODY SYSTEM


The hinged body system provides fast, easy access to on-board components. Its hook-and-loop hinge design lets you reach the chassis and battery simply by swinging the body up.


ROCKSTER WHEELS & ROCK LIZARDS TIRES


In 2007, the 1/10 scale Axial AX10 platform revolutionized RC crawling. The 1/24 scale AX24 XC-1 pays homage to that groundbreaking rig with a replica body and livery, plus 1.0" Rockster wheels and 2.44" Rock Lizards tires for nostalgic looks and trail-taming traction.


FULL BALL BEARINGS


Although the AX24 is smaller than many other Axial RC crawlers, it still measures up to our highest quality standards. For example, you'll find no bushings here. The drivetrain spins freely on sealed bearings throughout the entire vehicle.


AXIAL AS-1 SERVOS


Axial AS-1 servos are mounted just above the axle, with servo savers that allow for steering accuracy while protecting the servo gears in the event of a bind or impact.


DYNAMITE 88T BRUSHED MOTOR


The Dynamite 88T brushed electric motor provides the right amount of torque to conquer steep climbs. It's mated to a stamped aluminum motor mount to keep flex to a minimum and protect the gears.


IMPROVED SPEKTRUM SLT3 TRANSMITTER WITH 2-IN-1 SYSTEM


The included Spektrum SLT3 transmitter is ergonomically designed for fatigue-free driving and has a foam wheel for precise fingertip control. Paired with a Spektrum 2-in-1 ESC/Receiver, its 2.4GHz signal lets you crawl in the company of multiple other rigs without worrying about interference. A new throttle port serves as an ESC bypass for using aftermarket ESCs without having to buy a new receiver.


Product Specifications


Product Height: 3.7" (94 mm)
Ball Bearings: Complete Vehicle
Chassis: Side Plate
Completion Level: Ready-To-Run
Drivetrain: 4WD
Drive Type: Forward/Brake/Reverse
Speed Control: Included
Wheelbase: 5.3" (135 mm)
Motor Type: Brushed
Rear Track: 4.5 in (113mm)
Power Type: Electric
Servos: Included
Front Track: 4.5 in (113mm)
Product Width: 4.5" (114 mm)
Radio: Included
Tire Tread: Axial Rock Lizards
Vehicle Type: Rock Crawler
Body: XC-1 Screened
Brakes: Integral with ESC
Pinion: 11T
Scale: 1/24
Charger: Included
Differential: Worm Gear 16T/4T
Receiver: Included
Shock Type: Coil-over 1.35-2.0 in (35-51mm), Plastic
Product Length: 7.8" (198 mm)
Spur Gear: 55T
Steering Type: 4WS
Suspension: Solid Axle, Front and Rear
Wheel Width: 0.5 in (12.5mm)
Battery: Included
Connector Type: PH 2.0 (High-Current Ultra Micro)
Ground Clearance: 1.3 in (34mm)


In The Box


1x Axial AX24 XC-1 1/24 Scale 4WS RTR Rock Crawler
1x Spektrum SLT3 2.4GHz 3-Channel Radio System
2x Axial AS-1 Servo
1x Spektrum 2-in-1 ESC/Receiver Combo
1x 0.5 Amp USB Charger
1x Dynamite 88T Brushed Electric Motor
1x Dynamite 350mAh 2S 7.4V LiPo
4x AA Transmitter Batteries
1x Product Manual
1x Miscellaneous Tools


Needed to Complete


Nothing! Everything you need to begin having fun with the 1/24 AX24 XC-1 4WS Crawler is included!
Before 179,99 €
169,99 €
incl. Tax
plus Shipping
 Preorder
Item number

AXI00003T1

Manufacturer

Axial

Packing weight0,0 Kg
EAN605482167977
NewCondition
169.99EURPreOrder
AxialAXI00003T1605482167977
Amount

Availability in my store

Recommended Accessories

DYNB0012 - Dynamite 7.4V 350mAh 2S LiPo
18,89 €
incl. Tax plus Shipping
Please login first, to use this function.