B53CHLV2 Servo

Description
The AGF-RC B53CHL V2 is a 20mm standard servo with a part-aluminum housing The servo is HV capable and can be operated directly on a 2s LiPo (4.8 - 8.4V). With 32kg actuating force, this power proftz can show what it can do in various tasks.
Whether in a fixed-wing model or in an RC car, the B53CHL V2 delivers top performance at a very good price.

The B53CHL V2 is also programmable with the optional USB Inteface AGF-SP.

This requires a Windows computer with Windows 7 or 10. The servos are supplied directly via the USB port and only need to be plugged into the interface. For example, the soft start, neutral point or direction of rotation can be set in the software. Furthermore, the Sanwa SSR mode can be activated if required, which is of particular interest to RC car drivers. The integrated overload cut-off can also be adjusted in 3 stages and you can select what should happen in the event of signal loss.

Of course, these are optional features, all servos can be operated as normal straight out of the box and do not need to be adjusted beforehand!

• Inexpensive, extremely powerful HV servo in standard design
• HV capable, 4.8V - 8.4V
• 32kg at 8.4V 0.135sec / 60°
• Programmable with optional USB interface AGF-SP
• Titanium gears, double ball bearing, digital, 25 tooth output Futaba / Savöx compatible

Technical data

• Actuating time S2/60° (sec): 0.135
• Actuating time S1/60° (sec): 0.16
• Control frequency: 1520us // Up to 333Hz
• Width (mm): 20
• Actuating force S1 (kg*cm): 26
• Actuating force S2 (kg*cm): 32
• Height (mm): 37.2
• Voltage range: 4.8V-8.4V
• Length (mm): 40
• Weight (g): 69
• High-voltage capable up to 8.4V: Yes
• Packaging: Cardboard Large AGF
• Recommended applications: Helicopter, airplane, car, boat
• Ball bearing (number): 2
• Voltage 1 (Volt): 6,0
• Motor type: Bell armature motor
• Gear type: Metal
• Housing type: Part metal
• Output teeth (number): 25
• Voltage 2 (Volt): 8,4
• Classification: Standard