B13DLM V2 Servo

Description
The AGF-RC B13DLM V2 is a 12mm mini servo which is HV capable and programmable! So it has no equal in this class. Operation with a 2s LiPo is no problem for this little powerhouse. With 4.5kg*cm torque, it can be used for various tasks.
Suitable for fixed-wing models and as an upgrade for corresponding RTF servos.

The B13DM V2 is small, light and inexpensive, but still offers very good performance.

The B13DLM V2 is also programmable with the optional USB Inteface AGF-SP.

This requires a Windows computer with Windows 7 or 10. The servos are supplied directly via the USB port and only need to be plugged into the interface. In the software, for example, the soft start, the neutral point, the servo travels can be adjusted (larger and smaller) or the direction of rotation can be set. Furthermore, the Sanwa SSR mode can be activated if required, which is of particular interest to RC car drivers. The integrated overload cut-off can also be adjusted in 3 stages and you can select what should happen in the event of signal loss.

Of course, these are optional features, all servos can be operated as normal straight out of the box and do not need to be adjusted beforehand!

• Inexpensive small mini servo with metal gearing
• HV capable, 4.8V - 8.4V
• 4.5kg*cm at 8.4V 0.10sec / 60°
• Programmable with optional USB interface AGF-SP
• Digital servo with double ball bearings

Technical data

• Actuating time S1/60° (sec): 0.13
• Actuating time S2/60° (sec): 010
• Width (mm): 12
• Weight (g): 17
• Length (mm): 22.8
• Height (mm): 29.4
• Actuating force S1 (kg*cm): 3.8
• Actuating force S2 (kg*cm): 4.5
• Voltage range: 4.8V-8.4V
• Control frequency: Up to 333Hz, center pulse 1520 us
• High-voltage capable up to 8.4V: Yes
• Packaging: Plastic bag AGF
• Motor type: Brush motor
• Recommended applications: Helicopter, airplane, car, boat
• Ball bearing (number): 2
• Voltage 1 (Volt): 6,0
• Gear type: Metal
• Housing type: Part metal
• Output teeth (number): 25
• Voltage 2 (Volt): 8,4
• Classification: Mini