A81BMWP Power PRO 55KG Servo

Description
The AGF-RC A81BMWP is a premium brushless servo of the PRO series with an all-aluminum housing. The servo is HV capable and can be operated directly on a 2s LiPo (4.8 - 8.4V). Instead of a potentiometer, a wear-free magnetic sensor is installed.

The A81BMWP is ideal as a steering servo or in large surface models. It is virtually backlash-free, extremely hard in the center position and powerful and fast at the same time. All these attributes make it the perfect servo when power, precision and speed are required, especially for steering and in large 3D and aerobatic models.

The A81BMWP is waterproof to IP67

With an actuating force of 55kg*cm and an actuating time at 8.4V of 0.087 / 60°, it leaves nothing to be desired. Of course, the A81BMWP can also be used in other applications that require force and speed.

The AA81BMWP is also programmable with the optional USB Inteface AGF-SP & MB-1.

This requires a Windows computer (or smartphone with iOS or Android for the MB-1) with Windows 7 or 10. The servos are supplied directly via the USB port and only need to be plugged into the interface. In the software, for example, the soft start, the neutral point, the servo travels can be adjusted (larger and smaller) or the direction of rotation can be set. Furthermore, the Sanwa SSR mode can be activated if required, which is of particular interest to RC car drivers. The integrated overload cut-off can also be adjusted in 3 stages and you can select what should happen in the event of signal loss.

Of course, these are optional features, all servos can be operated as normal straight out of the box and do not need to be adjusted beforehand!

• Premium full metal brushless PRO servo in standard size with 3x ball bearings
• High-voltage capable digital servo 4.8-8.4V, operation on 2s, fast and powerful!
• Programmable with optional USB interface AGF-SP and MB-1
• Dimensions (L/W/H): 40 x 20 x 37.5 mm Weight: 83 grams, IP67 waterproof
• 0.125/0.087 sec/60 degrees and 39/55 kg*cm at 6.0/8.4 volts, Megnetic sensor instead of potentiometer

Technical data

• Actuating time S2/60° (sec): 0.087
• Actuating time S1/60° (sec): 0.125
• Width (mm): 20
• Height (mm): 37.5
• Actuating force S1 (kg*cm): 39
• Voltage range: 4.8V-8.4V
• Length (mm): 40
• Actuating force S2 (kg*cm): 55
• Weight (g): 83
• Control frequency: Control frequency up to 333Hz, center pulse 1520us
• High-voltage capable up to 8.4V: Yes
• Recommended applications: Helicopter, airplane, car, boat
• Voltage 1 (Volt): 6,0
• Output teeth (number): 25
• Ball bearing (number): 3
• Motor type: Brushless motor
• Gear type: Steel
• Housing type: Full metal
• Voltage 2 (Volt): 8,4
• Classification: Standard