A80 12V Heli Combo (3x A80BVSH, 1x A80BVPH)

Description
The A80 12V Heli Combi is the ideal complete set for all pilots for whom only the best is good enough This combo combines the best swashplate servos with the ultimate tail servo from AGF-RC for unbeatable performance for 700-800 class helicopters at an attractive price. Please note that this is a 12V combo! The servos run on 8.4V but offer no performance! A 12V BEC or 3s LiPo is mandatory!

The AGF-RC A80BVSH is a brushless swashplate servo with an all-aluminum housing. The servo is 12V capable and can be operated directly with a 3s LiPo (10 - 14.4V). With the AGF SP V3 interface, the servo can be converted from 1520us to 760us! (Narrow Band)

With 40kg*cm torque and an extremely fast response time of 0.086s / 60° at a possible control frequency of up to 333Hz, the servo is perfect for tough use on the swashplate of high-end helicopters. The 3 ball bearings ensure that everything runs smoothly and perfectly even under the toughest conditions. The A80BVSH is optimized for operation with modern FBL systems and enables the best possible performance in tough 3D conditions.

The A80BVSH is also programmable with the optional AGF-SP V3 USB interface.

The AGF-RC A80BVPH is a brushless tail servo with an all-aluminum housing. The servo is 12V capable and can be operated directly from a 3s LiPo (10 - 14.4V).

With 20kg*cm torque and an extremely fast response time of 0.039s / 60° at a possible control frequency of up to 666Hz, the servo is perfect for tough use on the tail rotor of high-end helicopters. The 3 ball bearings ensure that everything runs smoothly and perfectly even under the toughest conditions.

The A80BVPH is also programmable with the optional USB Inteface AGF-SP V3.

This requires a Windows computer with Windows 7 or 10. The servos are supplied directly via the USB port and only need to be plugged into the interface. In the software, for example, the soft start, the neutral point, the servo travels can be adjusted (larger and smaller) or the direction of rotation can be set. Furthermore, the Sanwa SSR mode can be activated if required, which is of particular interest to RC car drivers. The integrated overload cut-off can also be adjusted in 3 stages and you can select what should happen in the event of signal loss.

Of course, these are optional features, all servos can be operated as normal straight out of the box and do not need to be adjusted beforehand! (Attention, this is a 760 us tail servo! )

• Full metal 12V brushless high-end swashplate servo set in standard size
• 12V capable, 10-14.4V // Selectable via interface 1520us or 760us! (Narrow Band)
• Swashplate = 40kg*cm at 12.6V 0.086sec / 60° Tail servo = 20kg*cm at 12.6V 0.039sec / 60°
• Extremely fast and powerful for use as a high-end swashplate servo set for 700-800 helis
• Brushless motor, 3x ball bearings // Programmable with optional USB interface AGF-SP V3 // Waterproof!

Technical data

• Actuating time S2/60° (sec): 0.086 // 0.039
• Actuating time S1/60° (sec): 0.113 // 0.056
• Voltage 1 (Volt): 10
• Voltage range: 10-14.4V
• Voltage 2 (volts): 12,6
• High-voltage capable up to 8.4V: 14.4V, Yes
• Width (mm): 20
• Actuating force S1 (kg*cm): 30// 13
• Height (mm): 37.5
• Length (mm): 40
• Actuating force S2 (kg*cm): 40 // 20
• Weight (g): 81
• Control frequency: Up to 333Hz, center pulse 1520us // Up to 666Hz, center pulse 760us
• Packaging: Combo SET AGF
• Application recommendation: Helicopter
• Gear type: Metal
• Output teeth (number): 25
• Ball bearing (number): 3
• Motor type: Brushless motor
• Housing type: Full metal
• Classification: Standard