CR-18pro 1:18 Pro Crawler Trail Hunter sand RTR
Absima's 1:18 crawler in the PRO version can do more than many of its big brothers. Especially with the "Performance Upgrade" like portal axles front and rear, metal gearbox made of tool steel, 1.2" tyres and a modified drive ratio for even more torque, it becomes a real crawler fun machine.
You don't need much space and the "Playground" is quickly built. Just throw a few cushions or on the ground and the fun can begin! The proportional radio remote control makes the finest driving manoeuvres possible and steers the little crawler over even the most complicated-looking obstacles.
Portal axles front & rear
Metal gearboxes on front & rear axles.
2.4GHz transmitter/receiver unit
Lighting by operation on transmitter
Oversize 1.2" AT tyres with internal bead lock system
Chassis mounted 1kg steering servo with panhard bar
PPX4 water resistant electronics
Metal chassis frame
Painted 1.2mm Lexan bodywork
Tight turning circle of 80cm
Drive time of up to 45 minutes
Steering angle of up to 45°.
Ultimate ground clearance due to portal axles and 1.2" tyres
Due to its design, the "Trail Hunter" chassis probably has the highest ground clearance currently available on the market.
Scale: 1:18
4WD (four-wheel drive)
2.4GHz remote control system
High torque gearbox, reduction ratio 104:1
55T / 030 brushed motor
Differentials fully locked (front & rear)
Telescopic UJ cardan shafts
Metal chassis frame
Drag/Mountain Brake (prevents rolling on hills)
Digital proportional steering for sensitive driving manoeuvres
LED lighting
Scale body with many add-on parts
Bead lock rims with super soft AT tyres
Waterproof 1kg mini steering servo
2-in-1 speed controller/receiver unit
Drive time: approx. 45 minutes
Extreme approach and departure angle (67.4° / 80.5°)
Speed controller: 2-in-1 ESC/RX unit, PPX4, 10A/50A
Remote control: 2.4GHz, 4-channel
Steering servo: 1kg actuating force, waterproof
Motor: 030 / 55T
Gear ratio: 104:1
Battery: LiPo 7.4V/2S 600mAh
Battery connector system: Molex 2-pin
Wheelbase: 158,5mm
Ground clearance: 43,7mm
Track width: 110mm
Length: 241mm
Width: 125mm
Height: 130,8mm
Weight: 400g
Wheels: 19.5x58mm
1x Mini PRO Crawler
1x 2.4GHz transmitter unit
1x LiPo battery 7.4V 600mAh
1x US charging cable
1x sticker sheet
1x manual DE/EN/FR
1x Mini tool set
4x AAA batteries for the transmitter
You don't need much space and the "Playground" is quickly built. Just throw a few cushions or on the ground and the fun can begin! The proportional radio remote control makes the finest driving manoeuvres possible and steers the little crawler over even the most complicated-looking obstacles.
HIGHLIGHTS:
Portal axles front & rear
Metal gearboxes on front & rear axles.
2.4GHz transmitter/receiver unit
Lighting by operation on transmitter
Oversize 1.2" AT tyres with internal bead lock system
Chassis mounted 1kg steering servo with panhard bar
PPX4 water resistant electronics
Metal chassis frame
Painted 1.2mm Lexan bodywork
Tight turning circle of 80cm
Drive time of up to 45 minutes
Steering angle of up to 45°.
Ultimate ground clearance due to portal axles and 1.2" tyres
Due to its design, the "Trail Hunter" chassis probably has the highest ground clearance currently available on the market.
FEATURES:
Scale: 1:18
4WD (four-wheel drive)
2.4GHz remote control system
High torque gearbox, reduction ratio 104:1
55T / 030 brushed motor
Differentials fully locked (front & rear)
Telescopic UJ cardan shafts
Metal chassis frame
Drag/Mountain Brake (prevents rolling on hills)
Digital proportional steering for sensitive driving manoeuvres
LED lighting
Scale body with many add-on parts
Bead lock rims with super soft AT tyres
Waterproof 1kg mini steering servo
2-in-1 speed controller/receiver unit
Drive time: approx. 45 minutes
TECHNICAL DATA
.Extreme approach and departure angle (67.4° / 80.5°)
Speed controller: 2-in-1 ESC/RX unit, PPX4, 10A/50A
Remote control: 2.4GHz, 4-channel
Steering servo: 1kg actuating force, waterproof
Motor: 030 / 55T
Gear ratio: 104:1
Battery: LiPo 7.4V/2S 600mAh
Battery connector system: Molex 2-pin
Wheelbase: 158,5mm
Ground clearance: 43,7mm
Track width: 110mm
Length: 241mm
Width: 125mm
Height: 130,8mm
Weight: 400g
Wheels: 19.5x58mm
SUPPLY:
1x Mini PRO Crawler
1x 2.4GHz transmitter unit
1x LiPo battery 7.4V 600mAh
1x US charging cable
1x sticker sheet
1x manual DE/EN/FR
1x Mini tool set
REQUIRED ACCESSORIES:
4x AAA batteries for the transmitter
Item in stock
Delivery time ca. 5 to 7 days*
Item number | AB-18031 |
Manufacturer | Absima |
Packing weight | 0,0 Kg |