YGE SAPHIR 155 LVT BEC Brushless Regler m. Telemetrie 4-8S

Brushless controller YGE SAPHIR 155 LVT BEC with telemetryyge-logo.png


• New RCT cooling concept enables lower temperature development and better heat dissipation with a smaller design
• New, more powerful MOS-FETs offer not only a high current carrying capacity but also a higher • • • • dielectric strength: up to 8s LiPo!
• Super strong BEC with a load capacity of 12A continuous and 25A peak with direct buffering capability!
• The following telemetry protocols are currently compatible:
Mikado VBC, Graupner HoTT V4, Jeti ExBUS, Multiplex Sensor BUS V2
•Own YGE protocol for further telemetry connections via e.g. YGE TexY:
Futaba, Powerbox Core, Spektrum, FrSky, MSH Brain 2, Spirit FBL

Technical data

• 4 to 8s LiPo, feedback control or switch-off in case of undervoltageyge-saphir155.jpg
• BEC 5.0V - 8.4V
• BEC 12A continuous, 25A peak
• "T" stands for telemetry. The following telemetry protocols are currently compatible:
• Mikado VBC, Graupner HoTT V4, Jeti ExBUS, Multiplex Sensor BUS V2
• Own YGE protocol for further telemetry connections via e.g. YGE TexY
(Futaba, Spektrum, FrSky, Core), MSH Brain 2, Spirit FBL
• Update-capable (optional USB adapter available)
• Completely revised hardware and software (32-bit)
• the PWM frequency is automatically adapted to the needs of the motor
• The specified current is the maximum continuous full-gas current with good cooling
• current limitation
• Undervoltage detection can be switched off
• Speed control (governor mode)
• Soft start (sinusoidal or block commutation)
• Super slow soft start possible for scale helis (60 sec.)
• Active freewheeling, therefore unlimited partial load resistance
• Automatic timing, or adjustable in 6 steps
• EMK brake adjustable
• F3A / Acro brake (brake strength continuously adjustable in flight)
• Min. and max. values are logged and can be displayed in the optional PC tool after the flight (e.g. current)
• Speed limit: 240,000 rpm (2-Poler)
• Overtemperature / overload warning
• Anti-flash: Reduces the switch-on spark
• Basic programming via mode setup Fine adjustment and selection of telemetry protocol via PC setup, suitable • USB adapter is optionally available
• Weight without/with cable: 122g/178g
• Dimensions: 82 x 43.5 x 26mm

Scope of delivery

• 1x YGE Saphir 155V2 brushless speed controller
• 1x manual