5mm PRO Blitzlicht 3Wx2 rot

Extremely powerful navigation and position light from the compact 5 mm series - ideal for small models and helicopters with limited installation space.
Despite the small size, the luminosity corresponds to many times that of a classic 5 mm LED with an enormously wide beam angle of over 120°.
The scope of delivery includes three shatterproof polycarbonate caps for individual lighting design and a matching heat sink.
Perfectly suited for visible positions on wings, fuselages or rotor blades in model aircraft.

Technical data

• Reference power: 3 W
• Operating voltage: 2S/8 V or 3S/12 V (with additional resistor)
• Current consumption: approx. 0.26 A
• Beam angle: >120°
• Luminous intensity:
- approx. 65 lm (RED)
- approx. 150 lm (GREEN)
- approx. 250 lm (WHITE)
• Dimensions: approx. 4 × 15 mm (without heat sink)
• Weight: approx. 3 g (without cable)
• Cable length: 0.5 m PTFE, 0.14 mm²
• Function: Navigation/position light, flash/strobe suitable
• Design: Profile shape
• Dimension: 5 mm

Scope of delivery

• 1× Position/navigation light 3 W (color selectable)
• 1× Heat sink for heat dissipation
• 1× Connection cable 1 m (silicone, pre-assembled)
• 1× cap 5 mm profile-shaped
• 1× cap 5 mm round-cylindrical
• 1× cap 5 mm round-hemispherical, focusing

Still required

• Additional resistor for 3S operation (12 V)
• Optional: Thermal paste or adhesive for heat sink mounting

Installation instructions

Operation with 2S is possible directly. An additional resistor must be used for 3S (12 V).
The light should always be installed with the enclosed heat sink in order to safely dissipate the heat generated.
Sufficient air convection is essential for continuous operation.
A temperature check after installation is recommended.

Warning notices

• The LED light is extremely bright - never look directly into the active LED
• Operating heat can reach up to 70 °C - sufficient cooling is required
• No warranty for damage due to overheating or improper installation