uniLIGHT 4-Kanal ECO 4 Plus

The ECONOMY.4 is the compact control unit for simple and inexpensive lighting systems in small to medium-sized models.
It is significantly smaller and lighter than the BLACK.4, but dispenses with protective functions such as short-circuit or reverse polarity protection in favor of economy.
Despite the reduced equipment, four lighting functions can be controlled via one remote control channel.
Ideal for models where space, weight and costs play a role.

Channels and functions

• Channel 1: strobes - bright, white strobes at the wingtips or fuselage end
• Channel 2: Navigation/position lights - GREEN (right), RED (left), WHITE (rear), usually in continuous operation
• Channel 3: Beacon - red warning lights top/bottom, optionally as ACL flash or rotation effect
• Channel 4: Landing lights - white lights for surfaces, nacelle or landing gear

Technical data

• Receiver voltage: 4.8-9.6 V
• Light signals: 4 channels, up to 2 A each (3 A pulse load)
• Operation also possible without RC signal
• 15 effects with variable speed
• Soft switching process programmable
• Navigation with flash function programmable
• uniLIGHTPLUS data mode
• Weight: approx. 5 g (without cable)
• Dimensions: 22×30×6 mm
• No short-circuit protection
• No deep discharge protection
• No reverse polarity protection
• No galvanic isolation

Functions

• Number of channels: 4
• Galvanically isolated: No
• Master/slave switch-off: No
• Programmable: Yes (via uniLIGHT DESK)

Scope of delivery

• 1× ECONOMY.4 control module
• 1× Mounting brackets
• 1× Instructions
• 1× Y-cable for power supply

Installation instructions

The ECONOMY.4 does not have its own battery connection.
It can either be operated directly via an HV receiver (taking the load capacity into account) or via the enclosed Y-cable with a separate power source.
Configuration is carried out via the uniLIGHT DESK system.
In solo mode, the flashing pattern and its speed can be changed using the push-button.

Warnings

• No protective functions - no guarantee in case of overload or short circuit
• For systems with higher loads or safety requirements, we recommend the BLACK.4 with protective functions
• Ensure safe wiring and a clean power supply