Shopping Cart
Shopping Cart
Shopping Cart is empty
ENG | DEU

T-REX 300X DOMINATOR Super Combo - RTF

RH30E01X - T-REX 300X DOMINATOR Super Combo - RTF Align RH30E01X
Picture can be different from original item
               
               
         
Align newly designed T-REX 300X RTF (Ready to Fly), pre-assemble and combo with ALIGN A10 transmitter 10 channels 2.4GHz system and MiniGRS gyro makes flying much easier.

T-REX 300X, small but all-in-perfect. It adopts DFC rotor head unit, low CG and low wind resistance providing direct flight responses. The carbon fiber main frame is made of composite material and with reinforcement plate and brace assembly effectively enhancing structural intensity and torsion resistance. Narrow body design makes mechanical structure much stronger. The battery slider and top-mounted motor design with anodized bright red color brings pretty texture on this model. Thicken aluminum alloy tail boom for the best torsion resistance and increase the tail support rod lifetime. The progressive lightweight landing skid making this model the leader in this class. Plus the fiberglass painted canopy features lightweight and low in wind resistance. text by fw

T-REX 300X equipped with MiniGRS flybarless system special designed for ALIGN small helicopters (Under 500 series). It's light and simple with easy and quick settings, suitable for most pilots and beginners. Also the standard high torque and high efficiency 300MX 3700KV/2216 brushless motor not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation. Allow to provide consistent power output and keep stable RPM in non-stop 3D flying presenting perfect performance. Also it pairs with digital HV DS450 and DS455 servos, supporting 8.4V output, fast response and high torque. The new 25A brushless speed governor support 5~8.4V adjustable BEC voltage.

T-REX 300X RTF is tiny but everything all-in-one so that can perform well in not only in-door show but also outdoor 3D flights. This model offers you the best bargain price allow you to have fun flying at any time. text by fw


Specifications

T-REX 300X
Length: 476mm
Height: 158mm
Width: 88mm
Main Blade Length: 230mm
Main Rotor Diameter: 525mm
Tail Rotor Diameter: 143mm
Motor Pinion Gear: 14T
Main Drive Gear: 115T
Main Drive Pulley: 40T
Tail Drive Gear: 13T
Drive Gear Ratio: 8.21:1:3.08
Weight (w/o battery): 418g


Specifications

A10 Transmitter
Channels: 10
Available Models: Helicopter / Airplane / Multicopter
Frequency range: 2.408 ~ 2.475 GHz
Power: no higher than 20dBm (for EU)
System Mode: AFHDS 2A
Suitable Voltage Range: 4.0 ~ 6.0V DC
Receiving Distance: the open ground no interference < 1000M
Low Voltate Warning: Lower than 4.2V
Weight: 485g (excluded battery)
Size: 275x187x102mm


Specifications

MiniA.BUS Receiver
Channel: 14 channels
RX Sensitivity: -105dBm
RF Range: 2.4055 ~ 2.475 GHz
System Mode: 2.4G system AFHDS 2A
Power: 4.0 ~ 8.4V DC
Transmit Distance: In open space without interference <150M


Specifications

MiniGRS Flybarless System
Operating voltage range: DC 3.5~8.4V
Operating current consumption: <100mA @ 4.8V
Rotational detection rate: ±300°/sec
Rudder yaw detection rate: ±600°/sec
Sensor resolution: 12 BIT
Swashplate Support: 120° CCPM Swashplate
Mode Support: T-REX 250, T-REX 300, T-REX 450, T-REX 470, T-REX 500
Receiver Support: ALIGN A.BUS, Futaba S-FHSS S.BUS, Spektrum DSM2/DSMX remote receiver
Operating temperature: -20℃ ~ 65℃
Operating humidity: 0% ~ 95%
Size: 37.6x22.4x13mm


Specifications

RCC-3X Charger
Input Voltage: AC 100V~240V (50/60Hz)
Output Voltage: 2cell DC 7.4V / 3cell DC 11.1V
Supported Battery Type: Li-polymer / Li-ion
Charging Method: CC/CV
Charging Current: 2A
Size: 123x74.3x32mm
Weight: 260g


Specifications

Battery
Output: 11.1V 1300mAh 14.4Wh (3S1P)
Supports 5C charging
Dimension: 74x36.5x21mm
Weight: 115g


Content


• 1x T-REX 300X DOMINATOR Kit
• 1x MiniGRS Flybarless System
• 2x 230 Carbon Fiber Blades
• 2x 50 Tail Blade
• 1x RCE-BL25A 25 Brushless ESC
• 1x 300MX Brushless Motor(3700KV/2216)
• 3x DS450 Digital servo
• 1x DS455 Digital servo
• 1x A10 Radio Control System Combo
• 1x MiniA.BUS Receiver
• 1x Balance Charger RCC-3SX
• 1x 3S1P 11.1V 1300mAh / 30C
529,99 €
incl. Tax
plus Shipping
 Item in stock.
Delivery time ca. 1 to 3 days*
Item number

RH30E01X

Manufacturer

Align

Manufacturer-Nr.

RH30E01XT

Packing weight2,1 Kg
EAN4713413716210
NewCondition
529.99EURInStock
AlignRH30E01X4713413716210
Amount

Availability in my store
Please login first, to use this function.