SAVÖX SA-1230SG+ Servo

The SA-1230SG+ is an extremely powerful servo of the standard size which is very well suited for use in wing models. Of course, it can also be used in RC cars. The use as swashplate servos for scale helicopters up to the 700 class is another option.

Please note, due to the larger motor the SA-1230SG+ is 5mm deeper than normal standard servos!

The new + version of the well-known SA-1230SG+ servo differs minimally from its predecessor both visually and technically. A soft start which moves the servo slowly to the start position when switched on and the Sanwa SSR mode distinguish the + version.

The SA-1230SG+ servo is specially designed for use in wing models. The A in SA stands for Aircraft. Gearbox and software are optimised for this application, the low-backlash titanium gearbox is extremely robust and reliable. The software has also been adapted, the holding force around the zero position has been optimised here. Suitably reinforced servo arms are included in the scope of delivery and are specially designed for fixed-wing models.

Features:

• New + version with soft start, Sanwa SSR mode
• Powerful digital servo, ideal for fixed-wing models, robust low-backlash steel gearbox.
• Dimensions (L/W/H): 40.3 x 20.2 x 44.9 mm Weight: 79 grams
• 0,20/0,16 sec/60 degrees and 300/360 Ncm at 4,8/6,0 Volt
• Control frequency up to 333Hz, centre pulse 1520us

Specifications:

Actuating time S2/60° (sec): 0.16
Operating time S1/60° (sec): 0.20
Width (mm): 20.2
Actuating force S1 (kg*cm): 30
Actuating force S2 (kg*cm): 36
Voltage range: 4.8V-6V
Length (mm): 40,3
Height (mm): 44.9
Weight (g): 79
Drive frequency: Up to 333Hz, 1520us centre pulse
High voltage capability up to 8.4V: No
Voltage 1 (volts): 4,8
Recommended use: Helicopter, aeroplane, car, boat
Ball bearings (number): 2
Voltage 2 (volts): 6,0
Motor type: Bell-type armature motor
Housing type: Part metal
Output teeth (number): 25
Gear type: Steel
Classification: Standard

Scope of delivery:

• Servo arm GRP reinforced plastic
• 1 x single arm 12 - 18 mm
• 1 x single arm 15 - 28 mm
• 1 x single arm 23 - 38 mm
• 1 x double arm 23 - 38 mm