Max Bec 2D plus EX

Description

The MAX BEC linear voltage regulator is used to supply the on-board system in the model (power supply to the receiver and servos), which to supply 2 cells LiXX. The regulator ensures that the supply of servos remains constant throughout the time, and thus the positioning speed of the servos, regardless of the state of discharge of the batteries.

Manufactured to the very high European standards, the JETI MAX BEC 2D Plus EX is the latest dual-input linear voltage regulator from JETI. The MAX BEC 2D Plus EX incorporates a magnetic switch, so there is no mechanical wear and tear that would otherwise occur from switching the switch on and off.

The MAX BEC 2D Plus EX supports switching through the RC switch. This can be installed very easily.

The unit is equipped with a large heat sink to dissipate excess heat. In addition to the magnetic switch function, the 2D Plus EX is programmable using the JETIBOX and is also Duplex 2.4EX compatible.

This allows the setting of audible alarms for low input voltage or when temperatures are too high. When used with the Duplex 2.4EX, real-time feedback of input voltage and temperature as well as output voltage is also sent wirelessly to the JETIBOX profi. Redundant inputs are provided for power supply and the output is with in MPX socket, it supports Duplex and Duplex EX receiver.

Technical data

Weight [g]: 85
dimensions [mm]: 100 x 29 x 16
Continuous current [A]: 12
Peak current (max 30s) [A]: 20
Telemetry: Yes
Operating temperature [°C]: -10 to 130
Recommended input voltage [V]: 5.5 to 8.4
Output voltage [V]: 5.0 - 6.0
Quiescent current [µA]: 240
Max. Power dissipation [W]: 20
Number of battery inputs: 2
Max. input voltage [V]: 16