HV 3S/4S Digital Alu Servo ST62DBFT Crawler-Spec. Waterproof

Servos are part of the "RC system" and therefore the basis of a remote-controlled model.

Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, they also act as throttle servos, actuating both the throttle valve of the carburetor and the brakes. An under-dimensioned servo has a longer actuating time and a shorter service life when under load. Therefore, never skimp on the servo! A good servo does not have to cost a fortune, but it makes the model more reliable and lasts for years.

This version has an enormous actuating force, which is up to 62 kg thanks to the direct connection of a 3S or 4S LiPo battery, and all this at a speed of 0.090 seconds! The servo is also dust and waterproof (IP67) and can therefore be used in all weather conditions.

Our "Crawler Spec. Servos" are mainly used in 1:8 and 1:10 crawlers or other heavy vehicles that require a lot of power on the steering axle.

Technical data

• Servo category: Crawler Torque & Speed
• Operating voltage range: 7.4 - 16.8V HV
• Actuating force / speed @ 12.0V: 48.0kg / 0.120sec/60°
• Actuating force / speed @ 14.4V: 54.0kg / 0.100sec/60°
• Actuating force / speed @ 16.0V: 60.0kg / 0.095sec/60°
• Actuating force / speed @ 16.8V: 62.0kg / 0.090sec/60°
• Technology: Digital
• Motor type: Brushless
• Gearbox: High-strength steel
• Housing material: AL6061 T6
• Waterproof: IP67 waterproof
• Ball bearing: Metal ball bearing (2)
• Servo horns: 1* aluminum, 2* plastic
• Dimension: 40*20*41.5 mm
• Weight: 88.2 g
• Programmable: Yes with USB interface adapter # 2030110 (sold separately)
• ATTENTION: Separate power supply (2S, 3S or 4S LiPo with BEC / JST connector) required!

Scope of delivery

• 1x servo ST62DBFT with integrated servo arm
• Mounting screws