B44DLM V2 Servo

Description
The AGF-RC B44DLM is a low profile servo with a part-aluminum housing. The servo is HV capable and can be operated directly from a 2s LiPo (4.8 - 8.4V). With 15kg *cm actuating force, this power proftz can show what it can do in various tasks.
Whether in a fixed-wing model or in an RC car, the B44DLM delivers top performance at a very good price.

The B44DLM is also programmable with the optional USB interface AGF-SP.

This requires a Windows computer with Windows 7 or 10. The servos are supplied directly via the USB port and only need to be plugged into the interface. In the software, for example, the soft start, the neutral point, the servo travels can be adjusted (larger and smaller) or the direction of rotation can be set. Furthermore, the Sanwa SSR mode can be activated if required, which is of particular interest to RC car drivers. The integrated overload cut-off can also be adjusted in 3 stages and you can select what should happen in the event of signal loss.

Of course, these are optional features, all servos can be operated as normal straight out of the box and do not need to be adjusted beforehand!

• Inexpensive powerful HV servo in low profile design
• HV capable, 4.8V - 8.4V
• 15kg*cm at 8.4V 0.17sec / 60°
• Programmable with optional USB interface AGF-SP *Softstart etc.*
• Titanium gears, double ball bearing, digital, 25 tooth output Futaba / Savöx compatible

Technical data

• Actuating force S1 (kg*cm): 12
• Actuating force S2 (kg*cm): 15
• Width (mm): 20.2
• Height (mm): 29
• Voltage range: 4.8V-8.4V
• Length (mm): 40.8
• Weight (g): 44
• Control frequency: 50-333Hz
• Packaging: Blister large AGF
• High-voltage capable up to 8.4V: Yes
• Motor type: Brush motor
• Recommended applications: Helicopter, airplane, car
• Classification: Low Profile
• Ball bearing (quantity): 2
• Voltage 1 (Volt): 6,0
• Housing type: Part metal
• Output teeth (number): 25
• Voltage 2 (volts): 8,4
• Gear type: Titanium