A66FHLW Servo

Description
The AGF-RC A66FHLW is a high-end premium low-profile brushless servo with a full aluminum housing The servo is HV capable and can be operated directly on a 2s LiPo (4.8 - 8.4V). The new 4-pole brushless motor provides unprecedented performance in this class. Instead of a conventional potentiometer, a wear-free Hall sensor is used.

Completely newly developed software and internal control ensure extreme holding power even around the zero position. The virtually backlash-free gearbox rounds off the overall picture, a servo for the highest demands.

With an actuating force of 60 kg and a weight of 75.8 grams, this powerhouse can show what it can do in various tasks. At just 0.100sec/60°, the A66FHLW is very fast, making it the ideal servo for the ambitious racer or pilot. The maximum servo travel is up to 180°
These performance data are ideal when little installation space is available but maximum performance is required.

Please note that a servo of this performance class requires a sufficient power supply! Up to 7.5A current consumption is possible under full load / block!

Whether in wing models, rc-cars or on the swashplate in XXL helicopters - the A66FHLW delivers top performance that is second to none.
The A66FHLW is IP67 waterproof and therefore also ideal for rc-cars / crawlers etc.

46kg at 6.0V 0.132sec / 60°
53kg at 7.4V 0.115sec / 60°
60kg at 8.4V 0.100sec / 60°

The A66FHLW is also programmable with the optional USB interface AGF-SPV3.
An aluminum lever (HSS20P2) is already included in the scope of delivery, see pictures.

A Windows computer with Windows 7 or 10 is required for this. The servos are supplied directly via the USB port and only need to be plugged into the interface. In the software, for example, the soft start, the neutral point, the servo travels can be adjusted (larger and smaller) or the direction of rotation can be set. Furthermore, the Sanwa SSR mode can be activated if required, which is of particular interest to RC car drivers. The integrated overload cut-off can also be adjusted in 3 stages and you can select what should happen in the event of signal loss.

Of course, these are optional features, all servos can be operated as normal straight out of the box and do not need to be adjusted beforehand!

• High-end premium brushless low profile servo extremely powerful
• HV capable, 4.8V - 8.4V, up to 180° servo travel, IP67 waterproof
• 60kg at 8.4V 0.100sec / 60°, 4 pole brushless motor
• Hall sensor instead of potentiometer, programmable with optional USB interface AGF-SPV3
• All-aluminum housing, 75.8 gram weight, incl. aluminum lever (HSS20P2)

Technical data

• Actuating time S2/60° (sec): 0.100
• Actuating time S1/60° (sec): 0.132
• Width (mm): 20.2
• Height (mm): 29.5
• Voltage range: 4.8V-8.4V
• Length (mm): 40.8
• Actuating force S1 (kg*cm): 46
• Actuating force S2 (kg*cm): 60
• Weight (g): 75.8
• Actuating frequency: Actuating frequency up to 333Hz, center pulse 1520us
• High-voltage capable up to 8.4V: Yes
• Packaging: Cardboard Large AGF
• Recommended applications: Helicopter, airplane, car, boat
• Classification: Low Profile
• Ball bearing (quantity): 2
• Voltage 1 (Volt): 6,0
• Output teeth (number): 25
• Motor type: Brushless motor
• Gear type: Steel
• Housing type: Full metal
• Voltage 2 (Volt): 8,4