A06CLS V2 Servo

Description
The AGF-RC A06CLS V2 is an 8mm micro servo with an all-aluminum housing. The servo is HV capable and can be operated directly on a 2s LiPo (4.8 - 8.4V). With 3kg of actuating force, this little powerhouse can show what it can do in various tasks.
Whether in a glider, shock flyer or MiniZ car - the A06CLS V2 delivers top performance at a good price.

The A06CLS V2 is also programmable with the optional USB Inteface AGF-SP.

This requires a Windows computer with Windows 7 or 10. The servos are supplied directly via the USB port and only need to be plugged into the interface. In the software, for example, the soft start, the neutral point, the servo travels can be adjusted (larger and smaller) or the direction of rotation can be set. Furthermore, the Sanwa SSR mode can be activated if required, which is of particular interest to RC car drivers. The integrated overload cut-off can also be adjusted in 3 stages and you can select what should happen in the event of signal loss.

Of course, these are optional features, all servos can be operated as normal straight out of the box and do not need to be adjusted beforehand!

• 8mm micro servo in aluminum housing
• HV capable, 4.8V - 8.4V
• 3.0kg at 8.4V 0.052sec / 60°
• Programmable with optional USB interface AGF-SP
• 7 grams, dimensions 20*8*17.8 mm

Technical data

• Actuating time S2/60° (sec): 0.052
• Actuating time S1/60° (sec): 0.066
• Actuation frequency: 1520us / up to 333Hz
• Height (mm): 17.8
• Actuating force S1 (kg*cm): 2.2
• Length (mm): 20
• Actuating force S2 (kg*cm): 3
• Voltage range: 4.8V-8.4V
• Weight (g): 7
• Width (mm): 8
• High-voltage capable up to 8.4V: Yes
• Packaging: Plastic bag AGF
• Ball bearing (number): 1
• Voltage 1 (Volt): 6,0
• Recommended application: Airplane, car
• Motor type: Bell armature motor
• Gear type: Metal
• Classification: Micro
• Housing type: Full metal
• Voltage 2 (Volt): 8,4