QuadPack 35 35AMP Multi-Rotor (4St)
Abbildung kann von Originalware abweichen
This pack of four 35 amp Multi-Rotor ESCs is equipped with three (3) ESCs without a BEC and one (1) with a BEC*. Each ESC has optimized firmware specifically designed for Quadcopter and other Multi-Rotor platforms. Refresh rates up to 490 Hz gives your platform optimum stability and maneuverability without missing a beat. QuadPack 35 comes preprogrammed for Multi-Rotor platforms and is recommended for platforms ranging from 450 to 650 sizes pulling up to 35 amps** and running up to 6S LiPo. As with all Castle ESCs, this product is easily programmable using the Castle Link USB adapter (sold separately).
MIN: 2S LiPo
MAX: 6S LiPo
Max continuous amperage at full throttle:
BEC voltage (voltage regulator for powering radio and servos):
7 amp peak
5 amp continuous
(always check servo draw prior to first flight)
Width: 0.88" (22.4mm)
Length: 1.93" (49mm)
Depth: 0.33" (8.4mm)
Weight with wires (each)
0.98 oz. (27.8g)
Weight without wires (each)
0.42 oz (12g)
Items needed for operation or installation
Battery connector and motor connectors sold separately
Fully programmable Castle feature set using Castle Link USB adapter (sold separately) and freely downloadable Castle Link Windows software.
Abverkauf so lange der Vorrat reicht.
Lieferzeit ca. 1 bis 3 Tage*