Shopping Cart
Shopping Cart
Shopping Cart is empty
ENG | DEU

MICROBEAST Plus + BEASTRX

BXM76400-RX - MICROBEAST Plus + BEASTRX BEASTX BXM76400-RX
Picture can be different from original item
BEASTX - SET
MICROBEAST PLUS + BEASTRX



New Firmware

current firmware

The Flybarless-Revolution!

MICROBEAST PLUS is based on the popular MICROBEAST and starts the next level of the BEASTX flybarless revolution. MEMS sensors of the latest generation measure the aircraft?s rotational movement with unprecedented precision and transmit the data digitally and in real time to the control system. These new sensors are insensitive to typical vibrations of a model helicopter. The housing made of plastic composite material keeps the weight of MICROBEAST PLUS sensationally low.

MICROBEASTPLUS and MICROBEASTPLUSHD work with the world?s proven EasySetup of BEASTX. The sophisticated setup can quickly be done everywhere and no expensive programming box or computer is needed. So many settings can be changed simply and easily at the flying field. Further options are available with the optional USB2SYS in-ter-face and the StudioX software package. MICROBEAST PLUS can be kept up to date by using the update functionality and advanced pilot can
thus customize the unit specifically to their needs. StudioX for Windows & Mac is available for download at www.beastx.com.

MICROBEAST PLUS
Input voltage: 3,5 V - 8,5 V DC (Operation with 2 cell LiPo possible)
Processor: 32 Bit ARM
Sensor: 6-Axis MEMS (Gyro + Accelerometer)
Dimensions: 36 x 25 x 14 mm
Weight (w/o wiring): ca. 11g

Features:
Servo center pulses:
• Swashplate: 1520µs
• Rudder: 1520µs, 960µs, 760µs

Servo pulse rates:
• Swashplate: 50 - 200Hz
• Rudder: 50 - 560Hz

Swashplate mixing:
• mCCPM, eCCPM: 90, 120, 135, 140
• Swash phasing (by using StudioX)

Input signals:
• Single channels
• PPM serial pulse
• SRXL (JR XBus, SUMD, M-Link...)
• Futaba S.Bus/S.Bus2
• Spektrum Remote Receiver* (DSM2/DSMX)
* with Spektrum Remote Receiver adapter


BEASTRX
FASST - FrSky 2.4GHz SRXL
7 / 14 - Channel Receiver

Warning: Due to different failsafe settings between trans- mitter and BEASTRX, users must disable failsafe on the trans- mitter side. Otherwise you will notice a jitter during a period of time on the channels you set failsafe.

This 14 channel SRXL-receiver is compatible with different 2.4 GHz systems, therefore observe the instructions regarding bind-procedure
and failsafe-adjustment from the manufacturer of your 2.4 GHz system as well as the following manual.

Compatibility
Futaba FASST 2.4GHz: 7-CH mode
14-CH-MULTI mode
FrSky transmitter modules: TF-8M, TF-14M

Specifications
Number of channels: 7 + SRXL data output (12+2 channels)
Operating voltage: 3.5V ~ 10V
Dimension: 54 x 30 x 14 mm
Weight: 13.5 g
Latency: 14 ms / ~ 70Hz (FS mode)
7ms / ~ 140Hz (HS mode)

Features
- Compatible with most of Futaba FASST 2.4 GHz systems
- SRXL data output, e.g. for usage in combination with MICROBEAST (with Firmware V3.0 or above)
- Improved capability of anti-interference


Content:
• MICROBEAST
• BEASTRX
• Receiver connection cables
• Mounting material
• Adjust tool
• Instruction manual
Before 189,80 €
175,90 €
incl. Tax
plus Shipping
 Item in stock.
Delivery time ca. 1 to 3 days*
Item number

BXM76400-RX

Manufacturer

BEASTX

Packing weight0,19 Kg
NewCondition
175.90EURInStock
BEASTXBXM76400-RX
Amount

Availability in my store
Please login first, to use this function.