DJI Lightbridge 2.4G Full HD Digital Video Downlink
Picture can be different from original item
GermanDJI Lightbridge is a revolutionary 2.4G Full HD digital video downlink offering extremely powerful technology in a small and lightweight form.
By offering 1920x1080p@30fps video data transmission from up to 1.7km (1.05 miles) away, its the ideal solution for professional aerial creators and FPV users.
It features an aluminum alloy casing, and extreme internal and external shielding for interference protection.
Recharging can be done through the supplied charger or a 3S~6S Li-Po battery.
Each charge lasts for up to 4.5 hours.
Give your creativity a boost with pin sharp imagery today.
• Up to 1080p60 input and 1080i60 output support
• Up to 1.7 km (1.05 miles) long distance transmission
• System latency of approximately 150ms
• Built-in 2.4G remote control link
• DJI multirotor flight controller required A2, WooKong-M, Naza-M V2, Phantom 2
Mobile device support
• USB charger for mobile devices functionality, prolonging the life of peripheral equipment.
• USB mobile device charging support.
• USB 2.0 image data output for iOS and Android synchronization
• Android 4.1.2 or above recommended
Built in OSD (On-Screen Display)
OSD is available natively, no additional equipment required.
Up to 8 downlinks can be connected for parallel streaming.
Each can work independently without interference with proper distance between them.
A single air system can transmit to multiple ground systems, sending video to multiple screens.
One ground system will send the control signal while additional ground systems receive the video signal
Encryption ensures that only authorized devices receive data. Encryption can be set up through the Lightbridge app.
Multiple downlinks can be connected for parallel streaming. Each can work independently without interference.
Transmission Distance (outdoor and unobstructed): 1.7 Km
Receiver Sensitivity (1%PER): -101dBm =b12dBm
Working Frequency: 2.4GHz ISM
Air System Antennas Gain: 2.0=b10.7dBi@2450MHz
Ground System Antennas Gain: 5.0=b10.7dBi@2450MHz
• Operating Temperature: -10~50 °C
• Dimension (no antennas):
- Air system: 68(L)x48(W)x21(H)mm
- Ground system: 125(L)x90(W)x20(H)mm
• Gross Weight (no antennas):
- Air system: 71g
- Ground system: 295g
Hardware Functions Supported
• Antenna Connector: MMCX Male (air system), SMA Male (ground system)
• Air System Operating Voltage: 3S~6S
• Ground System Operating Voltage: 3S~6S
• Air System Operating Amperage: 700mA =b120mA(@12V)
• Ground System Operating Amperage: 600mA =b110mA(@12V)
DJI Lightbridge Application Equipment
• Video Input Format:
- AV (PAL25/NTSC30)
- HDMI (720p50/720p60/1080i50/1080i60/1080p25/1080p30/1080p50/1080p60)
• Recommended mobile device:
- Samsung Galaxy Note3 QCOM, N9005, N9006
- Samsung Galaxy Note3 Exynos, N900
- Samsung Galaxy S4
- Samsung Galaxy Mega
- Optimus G Pro
- LG Electronics
- LG Electronics G2
- Sony Xperia Z (L36h)
- Sony Xperia Z Ultra (XL36h)
• System Requirement Of Mobile Device: Android system (version 4.1.2 or above)
• Supported HD Display Device:
- Konka 32-inch LED32M1200AF
- Konka 42-inch LED42M3820AF
- Konka 42-inch LED42X9600UF
- Skyworth 55E680E
- TCL L40F3309B
- TCL 4K*2K Smart 3D Cloud TV L5E5690A-3D
- Konka LED46F5580F
- LG 27EA33 Monitor
- 12-inch ORTECA Portable Monitor
- 7-inch FEELWORLD Portable Monitor
- 27-inch SAMSUNG S27D360H Monitor
• 1x Air system
• 1x Ground system
• 2x Air system panel antenna
• 3x Air system antenna
• 1x Gimbal cable (A)
• 1x micro HDMI cable
• 1x DBus cable
• 1x Air system Power & CAN cable
• 1x AV cable
• 2x Ground system antenna
• 1x Charger
• 2x Remote controller cables
• 2x Rectangle headed training port cable
• 1x micro USB cable
No longer available at manufacturer
|Packing weight||0,4 Kg|